Author Archive

Rear Shock Tower, Carbon 4mm – RC8B3 (1)

Written by Admin on . Posted in Team Associated RC8B3

PS01694WEB_EN

Item# PS01694   —   Fit: Team Associated RC8B3   —   Content: 1 Piece

 

This 4mm thick carbon shock tower was designed to replace the original rear shock tower of Team Associated’s RC8B3. Due to the lower weight compared to the stock shock towers it will lower the center of gravity.

FEATURES
• 4.0mm Thickness – with true carbon layers inside.
• Authentic PSM Carbon – superior material quality. high impact resistance.semi-gloss look.
• Lightweight – at only 18.0g in total.
• Lowers Center of Gravity
• Direct Fit – the stock part can be replaced directly without any problem. however we recommend to use #PS01692 for an ideal shock alignment.
• Designed and precise machined by PSM in Germany.

RECOMMENDED / OPTIONAL
PS01692 - Shock Standoff Set, AL7075 EV2 Silver – RC8B3 (4)

NOTE
• We recommend you seal the edges of the carbon fiber product with CA glue prior to use.
• The total thickness of this carbon product can vary by +-0.3mm as of manufacturing tolerances.
• Milling grooves may vary in deepness as of manufacturing tolerances.
• According to our policy of steady development and improvement of our products, we reserve the right to make changes in specifications concerning equipment, materials and design of this product at any time without notice.
• The edges of this product may be a little sharp in exceptional cases, please check our sealing recommendation for more details.
• You may darken the milling grooves with wiping oil over the surface.

• This is a performance product, it is intended to use for professional purpose only. PSM will not be responsible for any loss or damage whatsoever caused while using PSM products.
Please race your R/C cars on special designed tracks and join a local R/C club to receive proper insurance.

Front Shock Tower, Carbon 5mm – RC8B3 (1)

Written by Admin on . Posted in Team Associated RC8B3

PS01693WEB_EN

Item# PS01693   —   Fit: Team Associated RC8B3   —   Content: 1 Piece

 

This 5mm thick carbon shock tower was designed to replace the original front shock tower of Team Associated’s RC8B3. Due to the lower weight compared to the stock shock towers it will lower the center of gravity.

FEATURES
• 5.0mm Thickness – with true carbon layers inside.
• Authentic PSM Carbon – superior material quality. high impact resistance.semi-gloss look.
• Lightweight – at only 16.0g in total.
• Lowers Center of Gravity
• Direct Fit – the stock part can be replaced directly without any problem. however we recommend to use #PS01692 for an ideal shock alignment.
• Designed and precise machined by PSM in Germany.

RECOMMENDED / OPTIONAL
PS01692 - Shock Standoff Set, AL7075 EV2 Silver – RC8B3 (4)

NOTE
• We recommend you seal the edges of the carbon fiber product with CA glue prior to use.
• The total thickness of this carbon product can vary by +-0.3mm as of manufacturing tolerances.
• Milling grooves may vary in deepness as of manufacturing tolerances.
• According to our policy of steady development and improvement of our products, we reserve the right to make changes in specifications concerning equipment, materials and design of this product at any time without notice.
• The edges of this product may be a little sharp in exceptional cases, please check our sealing recommendation for more details.
• You may darken the milling grooves with wiping oil over the surface.

• This is a performance product, it is intended to use for professional purpose only. PSM will not be responsible for any loss or damage whatsoever caused while using PSM products.
Please race your R/C cars on special designed tracks and join a local R/C club to receive proper insurance.

Shock Standoff Set, AL7075 EV2 Silver – RC8B3 (4)

Written by Admin on . Posted in Team Associated RC8B3

PS01692WEB_EN

Item# PS01692   —   Fit: Team Associated RC8B3   —   Content: 1 Set

 

This shock standoff set was designed to replace the original standoffs of Team Associated’s RC8B3. Due to the lower weight and coating they are both lightweight and strong.

FEATURES
• EV2 Silver coating – protects the raw material
• 7075-T6 Aluminium – superior material quality. very strong and durable.
• Lightweight – at only 11.0g in total. (complete set incl. screws)
• Distance Shims – can be used to set the perfect shock alignment.
• Direct Fit – the stock part can be replaced directly without any problem. works great with PSM carbon shock towers.
• Designed and precise machined by PSM in Germany.

RECOMMENDED / OPTIONAL
PS01693 - Front Shock Tower, Carbon 5mm – RC8B3 (1)
PS01694 – Rear Shock Tower, Carbon 4mm – RC8B3 (1)

NOTE
• According to our policy of steady development and improvement of our products, we reserve the right to make changes in specifications concerning equipment, materials and design of this product at any time without notice.

• This is a performance product, it is intended to use for professional purpose only. PSM will not be responsible for any loss or damage whatsoever caused while using PSM products.
Please race your R/C cars on special designed tracks and join a local R/C club to receive proper insurance.

Main Chassis Shorty Conversion, Carbon 2.5mm – B44.3 (1)

Written by Admin on . Posted in Team Associated B44.3

  • PS01686WEB-EN

  • PS01686-360view

  • English
  • 360° View

Item# PS01686   —   Fit: Team Associated B44.3   —   Content: 1 Set

 

Our goal was to bring back the carbon fiber chassis to your B44.3 with a shorty LiPo configuration, in order to be competitive on low to medium grip surfaces as well.
After weeks of intense development we are proud to finally release our Carbon Chassis Shorty Conversion for Team Associated’s B44.3.

It includes two 5mm carbon battery trays fitted to keep your shorty LiPo batteries in place. Optional battery trays for saddle style LiPo batteries are available (#PS01687).
This chassis is made to suit low to medium grip surfaces, however, it works on some high grip surfaces too.

Our unique battery mounting system called AirMount is included as well. It was designed not to affect the chassis flex while keeping your battery in place. This system allows the chassis to bend both directions the same way so it can generate the ideal traction. It only weighs 14.5g fully assembled while retaining super strong.

This complete set reduces the overall weight of the stock B44.3 for around 60 grams. That allows you to add balancing weights for getting the car perfectly set to your driving style or just keep it as light as possible.

All included carbon items are precise machined by PSM in Germany from our authentic carbon fiber material which is truly premium quality, high impact resistant and semi-gloss looking.

FEATURES
• Exclusive AirMount System. Unique battery mount without affecting chassis flex.
• Inclusive Battery Trays. 5mm carbon trays designed for shorty lipo configuration.
• Balanced Flex. Designed for low to medium grip surfaces (works on some high grip surfaces as well)
• Lightweight. Total Saving = 60.0g / Chassis Plate (98.0g) / AirMount (14.5g) / Battery Trays (13.0g)
• Authentic PSM Carbon. Premium quality material. High Impact resistance. Semi-gloss look.
• Designed and precise machined by PSM in Germany.
• RoHS tested and approved raw material.

INCLUDED
1x Main Chassis Plate – Carbon 2.5mm
1x Battery Strap with PSM Logo – Carbon 2.5mm
1x Battery Tray R shorty configuration – Carbon 5mm
1x Battery Tray L shorty configuration – Carbon 5mm
1x Center Brace – Carbon 2.5mm
2x Short posts for AirMount – Aluminium 7075
2x Long posts for AirMount – Aluminium 7075
6x Threaded inserts for battery trays – Aluminium 7075
1x Screw set – Black Steel (12 Pieces)

RECOMMENDED / OPTIONAL
PS01687 – Saddle LiPo Conversion Kit for #PS01686 (Set) *available soon*
PS01688 – Front Upper Deck – Hard, Carbon 2.5mm – B44.3 (1) *available soon*
PS01689 – Rear Upper Deck – Hard, Carbon 2.5mm – B44.3 (1) *available soon*
PS01690 – Balance Weight Set for #PS01686, Brass Gold (1) *available soon*

• We recommend you seal the edges of the carbon fiber with CA glue prior to use.

NOTE
• The thickness of this carbon product can vary by +0.3mm/-0.3mm as of manufacturing tolerances.
• The weight of this product can vary by different manufacturing batches.
• According to our policy of steady development and improvement of our products, we reserve the right to make changes in specifications concerning equipment, materials and design of this product at any time without notice.

Rear Shock Tower, Carbon 5mm – TLR 8ight 3.0 (1)

Written by Admin on . Posted in Team Losi 8ight

  • PS01685WEB_EN

  • PS01685-360view

  • English
  • 360° View

ITEM# PS01685   /   FIT: TLR 8IGHT / 8IGHT-E 3.0   /   CONTENT: 1 Pc

• Developed with Billy Fischer, professional R/C driver (USA)

• Lightweight and rock solid design, only 23.0g in total.

• 5mm thick carbon material – authentic PSM semi-gloss look. added stiffness. greater scratch resistance.

• Refined rollcenter geometry for a better vehicle performance. improves rear traction.

• Designed and precise machined by PSM in Germany.

• RoHS tested and approved carbon material.

This 5mm thick carbon shock tower was designed to replace the original rear shock tower of TLR’s 8ight 3.0 Buggy. It features a refined rollcenter geometry which gives your buggy a better overall performance, easier handling and more rear traction, especially in combination with our front carbon shock tower (#PS01684). Developed with help of US Pro Driver Billy Fischer, this product is well engineered and was tested in tough racing competition.

• We recommend you seal the edges of the carbon fiber with CA glue prior to use.
• We recommend you to use Losi 5-40×7/8” Button Head Screws ( LOSA6282) when assembling the wing mount.